XPS study of Cr segregation in a martensitic stainless steel

Cr martensitic steels are promising materials for structural applications in future nuclear fusion reactors. Because the embrittlement after tempering treatments can be a serious problem, the fracture mode of a steel with 10.5 wt% of Cr treated at 700°C for 18 h has been investigated through Charpy tests in the temperature range from −100°C to +150°C. X-ray photoelectron spectroscopy (XPS) analyses carried out on the fracture surfaces evidenced the segregation of Cr in both ductile and brittle (quasicleavage) fields. The unexpected result indicates that Cr segregation weakens the atomic bonds; thus, the fracture path in both the cases corresponds to the zones with higher Cr content.     

Study of the nanostructure of γ‐irradiated high‐density polyethylene/carbon black composite and its durability as geomembrane

The degradation of the nearby generation of high‐density polyethylene (HDPE) loaded with 2.5% of carbon black (CB) content (ie, HDPE/CB composites) is studied experimentally with the end goal of radiation safety applications. The impact of various γ‐irradiation doses in the air on the nanostructure of free volume and durability has been researched. The free volume was evaluated utilizing the positron annihilation lifetime (PAL) technique while the durability was contemplated by measuring the mechanical properties such as strain, elongation at break, and tear resistance. The electrical conductivity was explored to demonstrate the impact of the irradiation dose on the conductivity of the samples. Surface morphology studies using a scanning electron microscope (SEM) showed the surface fracture of HDPE/CB composites for unirradiated and irradiated samples. The surface roughness of the HDPE/CB GMs increases with increasing the irradiation dose. Among various uses of HDPE/CB composites, sheets are liners of dumps used to dispose of interim storage for Low and Medium Level Waste of NORMs and TENORMs. HDPE Geomembrane liners proved its utilization from the results of present research of electrical, mechanical tests, and SEM morphology to have the required resistance to weather conditions.     

Optically induced level anticrossing in undoped GaAs/AlGaAs coupled double quantum wells

We report a photoluminescence detected anticrossing of the energy levels in an undoped asymmetric coupled-double-quantum-well buried in a p-i-n structure. Due to the built-in electric field, the quantum wells are tilted in such a way that the symmetric energy level is higher than that of the antisymmetric one in the conduction band. Keeping the laser excitation energy below the barrier, with increasing laser power, the level anticrossing and the quantum confined Stark effect were observed due to decreasing built-in electric field by the photogenerated electron and hole pairs.     

Quantification of midazolam,morphine and metabolites in plasma using 96‐well solid‐phase extraction and ultra‐performance liquid chromatography–tandem mass spectrometry

Currently, pharmacokinetic–pharmacodynamic studies of sedatives and analgesics are performed in neonates and children to find suitable dose regimens. As a result, sensitive assays using only small volumes of blood are necessary to determine drug and metabolite concentrations. We developed an ultra‐performance liquid chromatographic method with tandem mass spectrometry detection for quantification of midazolam, 1‐hydroxymidazolam, hydroxymidazolamglucuronide, morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide in 100 μL of plasma. Cleanup consisted of 96 wells micro‐solid phase extraction, before reversed‐phase chromatographic separation (ultra‐performance liquid chromatography) and selective detection using electrospray ionization tandem mass spectrometry. Separate solid‐phase extraction methods were necessary to quantify morphine, midazolam and their metabolites because of each group's physicochemical properties. Standard curves were linear over a large dynamic range with adequate limits of quantitation. Intra‐ and interrun accuracy and precision were within 85–115% (of nominal concentration using a fresh calibration curve) and 15% (coefficient of variation, CV) respectively. Recoveries were >80% for all analytes, with interbatch CVs (as a measure of matrix effects) of less than 15% over six batches of plasma. Stability in plasma and extracts was sufficient, allowing large autosampler loads. Runtime was 3.00 min per sample for each method. The combination of 96‐well micro‐SPE and UPLC‐MS/MS allows reliable quantification of morphine, midazolam and their major metabolites in 100 μL of plasma. Copyright © 2010 John Wiley & Sons, Ltd.     

A well‐balanced upstream flux‐splitting finite‐volume scheme for shallow‐water flow simulations with irregular bed topography

This study extends the upstream flux‐splitting finite‐volume (UFF) scheme to shallow water equations with source terms. Coupling the hydrostatic reconstruction method (HRM) with the UFF scheme achieves a resultant numerical scheme that adequately balances flux gradients and source terms. The proposed scheme is validated in three benchmark problems and applied to flood flows in the natural/irregular river with bridge pier obstructions. The results of the simulations are in satisfactory agreement with the available analytical solutions, experimental data and field measurements. Comparisons of the present results with those obtained by the surface gradient method (SGM) demonstrate the superior stability and higher accuracy of the HRM. The stability test results also show that the HRM requires less CPU time (up to 60%) than the SGM. The proposed well‐balanced UFF scheme is accurate, stable and efficient to solve flow problems involving irregular bed topography. Copyright © 2009 John Wiley & Sons, Ltd.     

On the simulation by a magnetic field of the quantized states in a quantum-well laser diode

The quantized states in a quantum-well semiconductor laser are simulated analytically by a magnetic field perpendicular to the well (infinite quasi-one-dimensional potential well) by deriving a close relationship for the magnetic-field strength which becomes a discrete quantity.     

Optimizing the spectral efficiency of photonic quantum well structures

One can construct photonic single quantum well structures by sandwiching a homogeneous medium slab as a defect between two symmetrical photonic crystals (PCs). It is shown that the number of observed resonant peaks increases with increasing slab thickness. It is found that while the slab is composed of alternatively stacked step-index films, the frequencies of these resonant peaks can be adjusted finely by changing the film thickness properly. In this case, the frequency and frequency interval of confined states can be tuned accurately, and the spectral efficiency can be greatly enhanced without increasing the volume of optical devices. Numerical simulation is based on the finite-difference time-domain (FDTD) method.     

High-performance 850 nm vertical-cavity surface-emitting laser in Gigabit Ethernet network

High-performance oxide vertical-cavity surface-emitting (VCSEL) laser is fabricated, and its usefulness is demonstrated as a suitable transmitting light source at 850 nm operating wavelength for Gigabit Ethernet application. Utilization of barrier reduction layers reveals low-threshold current requirement for operation at high modulation bandwidth. The electrical and optical characteristics, measured from the fabricated VCSEL, are simulated for Gigabit Ethernet transmission. Data rates of 1.25 Gbps with a bit error rate of 10⁻¹¹ are achieved by the use of a specific multimode network simulator.     

InGaAsSb/AlGaAsSb长波长多量子阱激光器有源区的优化设计

系统地研究了波长为2.7μm的InGaAsSb/AlGaAsSb多量子阱激光器中有源区的优化设计.分别用含应变势的6带KP模型和抛物带模型计算价带和导带的能带结构，并得到薛定谔方程和泊松方程的自洽解，由此计算量子阱在载流子注入时的增益谱.研究表明制约量子阱增益的主要因素不是跃迁矩阵元，而是粒子数反转程度，尤其是空穴填充HH1子带的概率.增加压应变或减小阱宽都会提高量子阱增益.前者降低了价带HH1子带空穴的平面内有效质量；后者拉大了价带子带间距，尽管它同时略微增加了空穴有效质量.这两种因素都导致价带顶空穴态     

量子阱器件的原理和应用

详细地描述了量子阱器件的工作原理，并介绍了它在几个方面的应用。